H&S, Enorossi & Tar River Hay Rakes
H&S
H&S 5114 Hi-Capacity Rake ... $24,900 IN STOCK
Hi-Cap Bi-Fold Rake | 14-60″ Wheels With Panels | Up To 28′ Raking Width
Hi-Cap Bi-Fold Rake | 14-60″ Wheels With Panels | Up To 28′ Raking Width
- H&S 5114 hi-capacity wheel rakes have the raking wheels positioned ahead of the rake arms, main frame beams and transport wheels. coupled with a high and wide end of frame, there are no hang-up points or restrictions when raking the heaviest of hay crops.
- A brake band on each front gauge wheels can be easily adjusted to field conditions.
- Large independent 60″ rake wheels with “Bee Hive” style spring suspension follow the contours of the ground smoothly.
- A large diameter rake wheel hub is used for added strength to the rake wheel dish.
- The adjustment for the ground pressure on the rake wheels allows the operator to fine tune the 5114 and 5116 wheel rakes to fit varying conditions.
- The rake arms feature 2 ball bearings on each end of the arm for long life, smooth operation, and less wear than rakes with bushings.
- The 60″ diameter rake wheels turn slower for less tooth wear and deliver more capacity.
- The windrow width adjustment is done with a hand crank and adjusts windrows from 38″ to 58″ width.
- Independent articulated rake beams have the flexibility to flex 3′ up, or 3′ down.
- Limited oscillating offset tandem transport wheels assure a smooth, level ride, even over irrigation tracks.
- Raking widths can be hydraulically adjusted in any position up to the pre-determined raking width. Setting the spring loaded stop allows you to set pre-determined raking widths up to 28′ on the 5114.
- Rake wheel wind boards are standard on the 5114 Rakes.
Enorossi
Enorossi ERBR-12 Bat Rake ... $7495
• 60" Wheels w/7.5mm Teeth Standard
• Ground Clearance with Optional 60" Wheel: 2.96 ft.
• All Enorossi Rake teeth are made of C85 Steel instead of C72 Steel
• Optional Center Hyd. Kicker Wheel
• One Side Raking
• Hydraulic Fold
• 24' Raking Width (12 Wheel)
• High clearance where the raked hay goes through
• Independent rake wheel arms with patented setting spring system. Theis allows the operator to adjust the rake wheel ground pressure without the use of any tools.
• Easy windrow width adjusting system
• Simple and robust frames
• Low maintenance
• Unique design
• 60" Wheels w/7.5mm Teeth Standard
• Ground Clearance with Optional 60" Wheel: 2.96 ft.
• All Enorossi Rake teeth are made of C85 Steel instead of C72 Steel
• Optional Center Hyd. Kicker Wheel
• One Side Raking
• Hydraulic Fold
• 24' Raking Width (12 Wheel)
• High clearance where the raked hay goes through
• Independent rake wheel arms with patented setting spring system. Theis allows the operator to adjust the rake wheel ground pressure without the use of any tools.
• Easy windrow width adjusting system
• Simple and robust frames
• Low maintenance
• Unique design
Enorossi RR-350 Rotary Rake ... SOLD
Rotary rake with oil bath gearbox and cardan shaft with slip clutch
• Pneumatic pivoting tandem wheels on the RR 350
• Increased arm thickness
• Provided with articulated frame with shock absorber
• Adjustable cam
• 16.650-8 Wheels
Rotary rake with oil bath gearbox and cardan shaft with slip clutch
• Pneumatic pivoting tandem wheels on the RR 350
• Increased arm thickness
• Provided with articulated frame with shock absorber
• Adjustable cam
• 16.650-8 Wheels
Enorossi RR420 Hay Rake ... $7995 3Pt --- $8300 Pull Type - In Stock
11 Arm Rotary Hay Rake | 3PT | Req HP 30 | Working Width 14'
11 Arm Rotary Hay Rake | 3PT | Req HP 30 | Working Width 14'
Enorossi DR420-4R Double Rotor Rotary Rake/Tedder ... $8995 IN STOCK
3PT | 35-45 HP | Working Width 12.1′-13.8′
Click here to watch a Youtube Video of this rake in action.
3PT | 35-45 HP | Working Width 12.1′-13.8′
Click here to watch a Youtube Video of this rake in action.
Enorossi Hay Top 300 Rotary Rake/ Hay Tedder ... $5300 - IN STOCK
Hay Top 300 Rotary Rake/Tedder | 3PT | Working Width 9.84′
Hay Top 300 Rotary Rake/Tedder | 3PT | Working Width 9.84′
Enorossi Hay Tedder - 10' G2 ... $3195
10′ G2 Tedder | 3PT | 2 Rotors – 12 Arms | 20 HP | 15×600 Balloon Tires
10′ G2 Tedder | 3PT | 2 Rotors – 12 Arms | 20 HP | 15×600 Balloon Tires
Enorossi Hay Tedder - 17' Vortex G4 ... $6495 - IN STOCK
17′ Vortex G4 Tedder | Pull-Type | 4 Rotors-24 Arms | Mechanical Tilt | HP 20-30
17′ Vortex G4 Tedder | Pull-Type | 4 Rotors-24 Arms | Mechanical Tilt | HP 20-30
Tar River
Tar River D180-R Belt Rake ... $3945
Tar River 7′ Side Delivery Belt Rake | 3PT | 4-Tine
Two machines in one – rake and ted with the Tar River Implements Belt Rake! With its compact design and versatile functionality, the Belt Rake is an ideal hay tool for the small to medium sized hay producer. Great durability and low maintenance as well as simplicity of use are just a few of benefits for this tedder-rake combination Belt Rake.
Tar River 7′ Side Delivery Belt Rake | 3PT | 4-Tine
Two machines in one – rake and ted with the Tar River Implements Belt Rake! With its compact design and versatile functionality, the Belt Rake is an ideal hay tool for the small to medium sized hay producer. Great durability and low maintenance as well as simplicity of use are just a few of benefits for this tedder-rake combination Belt Rake.
